Epson VT Series - Arm #1 Cover

VT6L Maintenance 7. Covers
34 VT series Maintenance Manual Rev.2
7.1 Arm #1 Cover
CAUTION
■
Do not remove the
cover forcibly. Removing the cover forcibly may result in
damage to the cables, disconnection, and/or contact failure. Damaged
cables,
disconnection, or contact failure is extremely hazardous and may result in electric
shock and/or improper function of the robot system.
■
When
installing the cover, be careful not to allow the cables to interfere with the
cover mounting and do
not bend these cables forcibly to push them into the cover.
Unnecessary strain on cables may result in damage to the cables, disconnection,
and/or contact failure. Damaged cables, disconnection, or contact failure is
extremely hazardous and may result in e
lectric shock and/or improper function of
the robot system.
When
routing the cables, observe the cable locations
after removing the cover.
Be sure to
place the cables back to their original locations.
Arm #1 Cover
5-M4×12 Sems