VT6L Maintenance 6. Firmware Update
VT series Maintenance Manual Rev.2 31
(6) Step 3 window is displayed.
(6)-1 If the [Disable connection password] checkbox is selected, connection
authentication after updating the firmware is disabled.
(6)-2 If the <Install> button is clicked, the confirmation window is displayed.
When the [Disable connection password] checkbox is selected:
When the [Disable connection password] checkbox is not selected:
When the <OK> button is clicked, Step 4 window is displayed. Go to the step
(7).
When the <Cancel> button is clicked, the window is closed.
(7) Firmware installation starts.
When the firmware is installed, click the <Next> button. Reboot the Controller.
To Next Page
Loading...
