Epson WF-110 Series - Page 143

Power Consumption (with USB Con-
nection)
Not Charging Battery Printing: Approx. 12.0 W (ISO/
IEC24712)
Ready mode: Approx. 3.3 W
Sleep mode: Approx. 0.9 W
Power o: Approx. 0.2 W
Charging Built-in Battery Printing: Approx. 16.0 W (ISO/
IEC24712)
Ready mode: Approx. 14.6 W
Sleep mode: Approx. 12.1 W
Power o: Approx. 11.6 W
Charging Optional External Battery
Printing: -
*
Ready mode: Approx. 23.6 W
Sleep mode: Approx. 21.4 W
Power o: Approx. 22.0 W
* The same as the power consumption while "Not Charging Battery" because the printer does not charge the battery while
printing.
Note:
❏ Check the label on the printer for its voltage.
❏ For European users, see the following Website for details on power consumption.
http://www.epson.eu/energy-consumption
Built-in Battery Specications
Type Li-ion
Rated Power Supply Voltage 3.6 V
Capacity of Current 1.86 Ah
Continuous Number of Prints
*1
Color: Approx. 50 sheets
Monochrome: Approx. 100 sheets
Charging Time
*2
AC Adapter: Approx. 2.5 hours
*3
USB Port (5 V/0.5 A): Approx. 10 hours
USB Port (5 V/1.5A): Approx. 2.5 hours
*1 The value that is measured when printing A4 size ISO/IEC24712 patterns with a fully-charged new battery in an
environment of 25°C.
*2 The value that is measured when charging the battery with the power o in an environment of 25°C. If you operate the
printer while charging the battery, the charging time is longer.
*3 5 minutes charging allows you to print approximately 4 sheets of A4 size ISO/IEC24712 pattern in monochrome, or
approximately 2 sheets of A4 size ISO/IEC24712 pattern in color.
User's Guide
Appendix
143