Printer Basics
Part Names and Functions
A
Printer cover Supports loaded paper.
Keep this cover closed while the printer is not in use to
prevent foreign substances from entering the printer.
B
Control panel Operates the printer.
C
Battery charging light Turns on when the battery is charging, and turns o
when the battery is charged.
Flashes when the printer cannot charge the battery
because the temperature is too low (less than 5 °C) or
too high (higher than 40 °C). Charge the battery within
a range of 10 to 35°C (50 to 95°F).
D
Power light Turns on when the power is on.
Flashes when the printer is operating or an error occurs.
E
Output slot Ejects the printed paper.
F
Edge guide Feeds the paper straight into the printer. Slide to the
edge of the paper.
G
Rear paper feed Loads paper.
H
Micro USB port Connects a micro USB cable.
I
DC inlet Connects the AC adapter.
User's Guide
Printer Basics
19
To Next Page
Loading...
