Epson WF-4830 Series User Manual

286
You see a screen like this:
6. Select Start to clean the print head.
When the cleaning cycle is finished, you see a message on the screen.
Caution: Never turn off the product or open the front cover during a cleaning cycle or you may not
be able to print.
7. Select Yes.
8. Select Start to confirm that the print head is clean.
If you don’t see any improvement after cleaning the print head up to 4 times, wait at least 6 hours without
printing or longer if printing. Then try cleaning the print head again. If quality still does not improve,
contact Epson.
Parent topic: Print Head Cleaning
Related tasks
Loading Paper in the Cassette
Cleaning the Print Head Using a Computer Utility
You can clean the print head using a utility on your Windows or Mac computer.
1. Make sure there are no errors on the LCD screen.
2. Load a few sheets of plain paper in the product.

Epson WF-4830 Series Specifications

General

Print Technology	Inkjet
Duplex Printing	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Scanner Type	Flatbed, ADF
Scan Resolution	1200 x 2400 dpi
Display	4.3" color touchscreen
Functions	Print, Copy, Scan, Fax
Fax Speed	33.6 Kbps
ADF Capacity	50 sheets
Paper Capacity	250 sheets
Paper Sizes Supported	A4, A6, Executive, 4" x 6", 5" x 7", 8" x 10"
Mobile Printing	Apple AirPrint, Android Printing, Mopria Print Service
Ink Cartridges	Black, Cyan, Magenta, Yellow
Print Resolution	Up to 4800 x 2400 dpi
Max Print Speed	25 ppm (black), 12 ppm (color)