340
Print Head Cleaning
Related tasks
Aligning the Print Head Using the Product Control Panel
Selecting Basic Print Settings - Windows
Selecting Additional Layout and Print Options - Windows
Selecting Basic Print Settings - Mac
Selecting Printing Preferences - Mac
Loading Paper in the Cassette
Incorrect Colors
If your printouts have incorrect colors, try these solutions:
• Make sure the Grayscale setting is not selected in your printer software.
• Select EPSON Standard as the Color Mode (Windows) or Mode (Mac) setting in the printer software.
• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if
necessary.
• After you print, the colors in your printout need time to set as the ink dries. During this time, the colors
may look different than you expect. To speed up drying time, do not stack your printouts on top of each
other.
• Your printed colors can never exactly match your on-screen colors. However, you can use a color
management system to get as close as possible. Try using the color management options in your
printer software.
• Try selecting a different Color Management setting on the More Options tab of the printer software,
and changing the Scene Correction setting to something other than Auto Correct.
• For best results, use genuine Epson paper.
• On the product control panel, change the Enhance setting from Auto to another option, or select
Enhance Off.
Parent topic: Solving Print Quality Problems
Related concepts
Print Head Nozzle Check
Print Head Cleaning
Related references
Compatible Epson Papers
To Next Page
Loading...
Need help?
General
