Epson WF-4830 Series User Manual

369
Power consumption Standalone copying: 17 W (ISO/IEC24712)
Ready mode: 6.2 W
Sleep mode: 1.2 W
Power off mode: 0.2 W
Parent topic: Technical Specifications
Environmental Specifications
Temperature Operating: 50 to 95 °F (10 to 35 ° C)
Storage (after initial ink charge): 5 to 104 °F (-15 to 40 °C)
Storage (before initial ink charge): -4 to 104 °F (-20 to 40 °C)
1 month at 104 °F (40 °C)
Humidity
(without condensation)
Operating: 20 to 80% RH
Storage: 5 to 85% RH
Parent topic: Technical Specifications
External USB Device Specifications
Do not use devices with the following requirements:
• Dedicated driver
• Security settings (such as passwords, encryption, etc.)
• Built-in USB hub
Note: Use only external storage devices with independent AC power sources. External storage devices
that are powered via USB are not recommended. Epson cannot guarantee the operation of externally
connected devices.
Hard disk drives and USB
flash drives
2TB
Formatted in FAT, FAT32, or exFAT.
Multi-card reader 2TB
Formatted in FAT, FAT32, or exFAT.

Epson WF-4830 Series Specifications

General

Print Technology	Inkjet
Duplex Printing	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Scanner Type	Flatbed, ADF
Scan Resolution	1200 x 2400 dpi
Display	4.3" color touchscreen
Functions	Print, Copy, Scan, Fax
Fax Speed	33.6 Kbps
ADF Capacity	50 sheets
Paper Capacity	250 sheets
Paper Sizes Supported	A4, A6, Executive, 4" x 6", 5" x 7", 8" x 10"
Mobile Printing	Apple AirPrint, Android Printing, Mopria Print Service
Ink Cartridges	Black, Cyan, Magenta, Yellow
Print Resolution	Up to 4800 x 2400 dpi
Max Print Speed	25 ppm (black), 12 ppm (color)