Epson WF-4830 Series User Manual

62
• To enter a space, select Space.
• To finish entering your network name or password, select OK.
8. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the
LCD screen, then enter the password shown.
Note: Make a note of the SSID and password that appear.
9. Press the home button to return to the Home screen.
Computers and wireless devices can now access the product using the new network name and
password.
Parent topic: Wi-Fi Direct Mode Setup
Wi-Fi Protected Setup (WPS)
If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.
Using WPS to Connect to a Network
Parent topic: Wi-Fi or Wired Networking
Using WPS to Connect to a Network
If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to
connect your product to the network.
1. Press the home button, if necessary.
2. Press the icon.

Epson WF-4830 Series Specifications

General

Print Technology	Inkjet
Duplex Printing	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Scanner Type	Flatbed, ADF
Scan Resolution	1200 x 2400 dpi
Display	4.3" color touchscreen
Functions	Print, Copy, Scan, Fax
Fax Speed	33.6 Kbps
ADF Capacity	50 sheets
Paper Capacity	250 sheets
Paper Sizes Supported	A4, A6, Executive, 4" x 6", 5" x 7", 8" x 10"
Mobile Printing	Apple AirPrint, Android Printing, Mopria Print Service
Ink Cartridges	Black, Cyan, Magenta, Yellow
Print Resolution	Up to 4800 x 2400 dpi
Max Print Speed	25 ppm (black), 12 ppm (color)