Epson WF-4830 Series User Manual

73
9. Select Proceed to save your settings.
10. Select Close to exit.
11. Select Connection Check to verify the connection to the email server.
Email Server Settings
Parent topic: Wi-Fi or Wired Networking
Related tasks
Scanning to Email
Email Server Settings
Setting name Available options Description
Authentication
Method
Off
SMTP AUTH
POP before SMTP
Selects the authentication method for the printer to access
the mail server.
SMTP AUTH: Authenticates on the SMTP server
(outgoing mail server) when sending the email. The mail
server needs to support SMTP authentication.
POP before SMTP Authenticates on the POP3 server
(receiving mail server) before sending the email. When
you select this item, set the POP3 server.
Authenticated
Account
—
Lets you enter a user name or email address for the mail
server. Used with the POP before SMTP and SMTP
AUTH methods.
Authenticated
Password
— Lets you enter a password for the authenticated account.
Used with the POP before SMTP and SMTP AUTH
methods.
Sender's Email
Address
—
Lets you enter the email address to be displayed to the
sender
SMTP Server
Address
— Lets you enter the address of the SMTP server
SMTP Server Port
Number
— Lets you enter the port number of the SMTP server. The
default port is 25.

Epson WF-4830 Series Specifications

General

Print Technology	Inkjet
Duplex Printing	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Scanner Type	Flatbed, ADF
Scan Resolution	1200 x 2400 dpi
Display	4.3" color touchscreen
Functions	Print, Copy, Scan, Fax
Fax Speed	33.6 Kbps
ADF Capacity	50 sheets
Paper Capacity	250 sheets
Paper Sizes Supported	A4, A6, Executive, 4" x 6", 5" x 7", 8" x 10"
Mobile Printing	Apple AirPrint, Android Printing, Mopria Print Service
Ink Cartridges	Black, Cyan, Magenta, Yellow
Print Resolution	Up to 4800 x 2400 dpi
Max Print Speed	25 ppm (black), 12 ppm (color)