Epson WF-4830 Series User Manual

66
Network Connection Report Codes and Messages
Check the error codes and messages on the network connection report to solve problems you may
encounter with network connections. The tables here list solutions to problems based on the error codes
and messages that may appear on the top of the report.
1 Error code
2 Message
Note: Error codes and messages listed here may not all apply to your product.
Error Codes and Messages
Error code and message Solution
E-1
Confirm that the network cable is
connected and network devices such as
hub, router, or access point are turned on.
Make sure your router, access point, and/or hub are
turned on, and the network cable is securely connected to
your device and to your product.
If you are trying to set up Wi-Fi, remove the network cable
and set up Wi-Fi again. Ethernet and Wi-Fi cannot be
connected at the same time.

Epson WF-4830 Series Specifications

General

Print Technology	Inkjet
Duplex Printing	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Scanner Type	Flatbed, ADF
Scan Resolution	1200 x 2400 dpi
Display	4.3" color touchscreen
Functions	Print, Copy, Scan, Fax
Fax Speed	33.6 Kbps
ADF Capacity	50 sheets
Paper Capacity	250 sheets
Paper Sizes Supported	A4, A6, Executive, 4" x 6", 5" x 7", 8" x 10"
Mobile Printing	Apple AirPrint, Android Printing, Mopria Print Service
Ink Cartridges	Black, Cyan, Magenta, Yellow
Print Resolution	Up to 4800 x 2400 dpi
Max Print Speed	25 ppm (black), 12 ppm (color)