Epson WF-4830 Series User Manual

53
7. Select the Password field and enter your wireless password using the displayed keypad.
Note: The network name and password are case sensitive. Be sure to correctly enter uppercase and
lowercase letters, and numeric or special characters.
• To move the cursor, press the left or right arrows.
• To change the case of letters, press .
• To delete the previous character, press .
• To enter numbers and symbols, press .
• To enter a space, press Space.
8. Press OK when you finish entering your password.
9. Confirm the displayed network settings and select Start Setup to save them.
10. If you want to print a network setup report, select Print Check Report. (Otherwise, select OK.)
11. Press the home button to exit.
You see the icon on the LCD screen and should be able to connect to your product directly from
your computer or device, and then print. If you are printing from a computer, make sure you installed
the network software as described on the Start Here sheet.

Epson WF-4830 Series Specifications

General

Print Technology	Inkjet
Duplex Printing	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Scanner Type	Flatbed, ADF
Scan Resolution	1200 x 2400 dpi
Display	4.3" color touchscreen
Functions	Print, Copy, Scan, Fax
Fax Speed	33.6 Kbps
ADF Capacity	50 sheets
Paper Capacity	250 sheets
Paper Sizes Supported	A4, A6, Executive, 4" x 6", 5" x 7", 8" x 10"
Mobile Printing	Apple AirPrint, Android Printing, Mopria Print Service
Ink Cartridges	Black, Cyan, Magenta, Yellow
Print Resolution	Up to 4800 x 2400 dpi
Max Print Speed	25 ppm (black), 12 ppm (color)