141
Skip Blank Page
Ensures that your product does not print pages that contain no text or images.
Offset Settings
Lets you make fine-tune adjustments to the print position of data on your printout.
Print Density
Sets the level of ink coverage for double-sided printing.
Automatically change to monochrome mode
Select to print automatically in monochrome instead of color.
Optimize Finishing
Reduces paper misalignment to improve stapling and stacking printouts. Print speed is decreased.
Note: Displayed when the optional finisher unit is installed.
Thick Paper and Envelopes
Select an option to prevent ink from smearing when you print on envelopes or other thick paper.
Always Spool RAW Datatype
Increases print speed and may solve other printing problems.
Print as Bitmap
Increases print speed when printing is extremely slow or the print head stops during printing, and
other settings do not help.
Refine screening pattern
Prints graphics with a finer screening pattern.
Always Use the Driver's Paper Source Setting
Prints using the paper source setting in the printer driver, rather than the setting in your application.
Barcode mode
Reduces bleeding when printing barcodes on plain paper, letterhead paper, recycled paper,
preprinted paper, envelopes, and thick paper.
Detect Canceled Printing
Displays a message on the computer screen when a print job is canceled from the product control
panel.
Always Use the Driver's Color Setting
Prioritizes color settings from the printer driver software.
Reduce Print Data Size
Increases print data compression to improve print speed. Not recommended when printing fine
patterns.
To Next Page
Loading...
Need help?
General
