6.
Select the export format from Export > Export items.
❏ All Items
Export the encrypted binary le. Select when you want to include the security items such as password and
personal information. You cannot edit the le. If you select it, you have to set the password. Click
Conguration
and set a password between 8 and 63 characters long in ASCII.
is
password is required
when importing the binary le.
❏ Items except Security Information
Export the SYLK format or csv format
les.
Select when you want to edit the information of the exported
le.
7.
Click Export.
8.
Specify the place to save the le, select the le type, and then click Save.
e completion message is displayed.
9.
Click OK.
Check that the le is saved to the specied place.
Importing Contacts
Import the contacts information from the le.
You ca n i mp ort the
les
saved in SYLK format or csv format or the backed-up binary
le
that includes the security
items.
1.
Start Epson Device Admin.
2.
Select Devices on the side bar task menu.
3.
Select the device you want to congure from the device list.
4.
Click Device Conguration on the Home tab on the ribbon menu.
When the administrator password has been set, enter the password and click OK.
5.
Click Common > Contacts.
6.
Click Browse on Import.
7.
Select the le you want to import and then click Open.
When you select the binary
le,
in Password enter the password you set when exporting the
le.
8.
Click Import.
e conrmation screen is displayed.
9.
Click OK.
e validation result is displayed.
❏ Edit the information read
Click when you want to edit the information individually.
Administrator Information
>
Settings to Use the Printer
>
Making Contacts Available
450
To Next Page
Loading...
Need help?
General
