Epson WF-R5690 - Product Status Messages

You can also update the software by selecting EPSON Software Updater in the EPSON or EPSON
Software program group, accessible by the Start button, or on the Start or Apps screens, depending
on your version of Windows.
• OS X: You can manually update the software by opening the Applications > Epson Software folder
and selecting EPSON Software Updater.
Parent topic: Solving Problems
Product Status Messages
You can often diagnose problems with your product by checking the messages on its LCD screen. You
can also check for errors by pressing the Status button to display the Status Menu.
Note: If the LCD screen is dark, press the screen to wake the product from sleep mode.
LCD screen message Condition/solution
Printer error. Turn the power off and Turn the product off and then back on again. If the error
on again. continues, check for and remove any paper jams or protective
materials from the product. If the error is still displayed, contact
Epson for support.
You need to replace the following ink Replace the ink packs indicated on the LCD screen.
supply unit(s).
Communication error. Check if the Make sure the computer and product are connected correctly
computer is connected and the Epson Scan and Document Capture Pro software is
installed correctly.
No dial tone detected. Make sure the phone cable is connected correctly and the
phone line works. If you connected the product to a PBX (Private
Branch Exchange) phone line or Terminal Adapter, change the
Line Type setting to PBX. If you still cannot send a fax, turn off
the Dial Tone Detection setting. (Turning off the Dial Tone
Detection setting may cause the product to drop the first digit of
a fax number.)
Combination of the IP address and There is a problem with the network connection to your product.
the subnet mask is invalid. See the solutions in this manual.
320