EasyManua.ls Logo

Epson WF-R5690 - Network Interface Specifications

Epson WF-R5690
413 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Network Interface Specifications
Wi-Fi
Standard IEEE 802.11 b/g/n; complies with either IEEE 802.11 b/g or IEEE
802.11 b/g/n, depending on purchase location
Security WEP (64/128 bit)
WPA-PSK (TKIP/AES); complies with WPA2 with support for
WPA/WPA2 Personal
WPA2-Enterprise
Frequency band 2.4 GHz
Communication mode Infrastructure mode
Ad hoc mode
Wi-Fi Direct
Note: Wi-Fi Direct Simple AP mode available even if you connect
the product to an Ethernet network.
Ethernet
Standard IEEE802.3i/u/ab, IEEE802.3az
Communication mode Ethernet 100BASE-TX/10BASE-T
Ethernet 1000BASE-T; use a category-5e or higher cable, preferably
an STP (Shielded Twisted Pair) cable, to prevent risk of radio
frequency interference
Note: The connected device should be IEEE802.3az compliant.
Security Protocol
IEEE802.1X
IPsec/IP Filtering
SSL/TLS: HTTPS Server/Client or IPPS
SNMPv3
384

Table of Contents

Other manuals for Epson WF-R5690

Related product manuals