Nothing Prints Using the Postscript Printing Software
Documents Print Incorrectly Using the Postscript Printing Software
Accessing Printer Properties - Postscript - Windows
Parent topic: Solving Problems
Nothing Prints Using the Postscript Printing Software
If your document doesn't print, try these solutions:
• Make sure your product is turned on and properly connected.
• Make sure the printing language setting on the control panel is correct.
• Make sure your product is selected as the printer in your printing program.
Parent topic: Solving PostScript Printing Problems
Related topics
Enabling Epson Universal Print Driver (PCL) or PostScript Printing
Documents Print Incorrectly Using the Postscript Printing Software
If your document does not print correctly, try these solutions:
• If the file you are printing was created in an application that allows you to change the data format, such
as Adobe Photoshop, make sure the settings in the application match the printer software settings.
• EPS files created in binary format may not print correctly. Try creating the file in ASCII format instead.
• In Windows, the product cannot print binary data if it is connected to the computer using a USB cable.
Try selecting ASCII or TBCP as the Output Protocol setting on the Device Settings tab in the printer
properties.
• In Windows, select the appropriate substitution fonts on the Device Settings tab in the printer
properties.
• If the printed colors are incorrect, try adjusting the Color Mode setting on the Advanced tab of the
printer software.
• If printing is slow, try selecting Fast as the Print Quality setting on the Advanced tab of the printer
software.
Parent topic: Solving PostScript Printing Problems
Accessing Printer Properties - Postscript - Windows
You can access the printer properties to view and change product settings.
346
To Next Page
Loading...
Need help?
General
