4. Select Wi-Fi Setup Wizard.
Note: If you need to disable the wireless network to set up your product on an Ethernet network,
scroll down and select Disable Wi-Fi instead. Then follow the instructions on changing to a wired
network connection in this guide.
5. Select the name of your wireless network or enter the name manually.
Note: To enter the wireless network name manually, select Other Networks and select the
Network (SSID) field. Use the displayed keypad to enter your network name.
6. Select the Password field and enter your wireless password using the displayed keypad.
Note: The network name and password are case sensitive. Be sure to correctly enter uppercase and
lowercase letters, and numeric or special characters.
7. Press when you finish entering your password and select Proceed.
8. Confirm the displayed network settings and select OK to save them.
Note: If you need to change a setting, press the back button.
9. If you want to print a network setup report, press one of the buttons. (Otherwise, select Done.)
10. Press the home button.
44
To Next Page
Loading...
