EasyManua.ls Logo

Epson WorkForce 633 - Handling Media and Originals

Epson WorkForce 633
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2011/03/02
Revision: 1 Page: 13
2.3.2 Printing Area (Zero margin/ Borderless)
The printable areas of various paper sizes on the printer are defined hereafter. Values are expressed in dot units, where 1 dot =
1/360 inch. As is displayed in the following diagram, printable area can be defined as follows:
A = the width of the left override area
B’ = the width of the printable area
C’ = the width of the right override area
D’ = the length of the top override area
E’ = the length of the printable area
F = the length of the bottom override area
I = the length of the top override area (unprintable area)
D‘
I
A B’ C’
E
F’
Table 3 Printable Area Dimensions (Zero margin/ Borderless)
The printing area is specified by A’, B’, D’, and E’.
Paper Size
US EUR ASIA/PAC
JPN
A B’ C’ D’ E’ F’ I
Cut Paper
A4 YES YES YES YES 0 2976 0 0 4209 0 0
Letter YES NO NO NO 0 3060 0 0 3960 0 0
5x7in. / 2L Size YES YES YES YES 0 1800 0 0 2522 0 0
3.5x5in. / L Size YES YES YES YES 0 1261 0 0 1800 0 0
4x6in./10x15cm YES YES YES YES 0 1440 0 0 2160 0 0
Japanese Postcard
NO NO NO YES 0 1417 0 0 2098 0 0
8x10in. YES NO NO YES 0 2880 0 0 3600 0 0
16:9 wide YES YES YES YES 0 1440 0 0 2560 0 0
1) Only Photo Paper, Matte Paper – Heavyweight, Card are able to achieve margin less printing

Table of Contents

Other manuals for Epson WorkForce 633

Related product manuals