Epson WorkForce 633 - Set Printer Timer (Remote Mode) TI 08 H 00 H 00 H YYYY MM DD Hh MM Ss

2011/03/02
Revision: 1 Page: 64
6.1.3 Set printer timer (Remote Mode) " TI" 08H 00H 00H YYYY MM DD hh mm ss
[Format]
“TI” 08H 00H 00H YYYY MM DD hh mm ss
* Each of the parameters YYH,YYL,MM,DD,hh,mm and ss is a one byte binary format
parameter, and their definitions are as follows:
Parameter meaning Range
YYH Year
(YYL+YYH*256)
0-xxxx
YYL
MM Month 1-12
DD Day 1-31
hh hour 0-23
mm minute 0-59
ss second 0-59
[Function]
* If the parameter is out of range, this command is ignored, and the previous setting is
maintained.