Epson WorkForce 633 - Warning Code; Paper Path

2011/03/02
Revision: 1 Page: 80
7.3 Warning code
Structure
Item Byte (Hex) Value (Hex)
Header 1 04
Parameter counter 1 Warning kinds
Parameter n Occurred all warning code
The parameter <warning code> is one-byte Binary and indicates the warning code as follows,
<warning code> is consisted of the several fields as shown below.
When several warning appears at the same time, reply all the warning codes with the format below.
value [value value ].
<warning code> field is recognized in the following warning state. (This field is not recognized in @BDC-ST character string
when no warning is received)
For ink low warning, the order depends on the ink cartridge order.
The parameter is as follows.
Warning
Warning code
Ink low (Black)
10h
Ink low (Magenta)
11h
Ink low (Yellow)
12h
Ink low (Cyan)
13h
Maintenance request will occur soon
20
Black print mode
44
Cleaning disable (Black)
51h
Cleaning disable (Magenta)
52h
Cleaning disable (Yellow)
53h
Cleaning disable (Cyan)
54h
Ink low warning (10H-13H) occurs when the ink quantity is less than defined amount.
If the ink quantity is less than the one that can execute head cleaning, cleaning disable warning (51H-54H) occurs with the ink
low warning (10H-13H) together.
7.4 Paper path
Structure
Item Byte (Hex) Value (Hex)
Header 1 06
Parameter counter 1 02
Parameter 2 Paper path information
The parameter <paper path> is two bytes Binary code that indicate current paper path.
Following information is replied.
Paper Path
code
Cut sheet Font (Auto Select)
01FF