Epson WorkForce 633 - Select Printing Color ESC R N

2011/03/02
Revision: 1 Page: 58
5.1.32 Select printing color ESC r n
ESC r n Ver 1.00
[Name] Select printing color [Setting]
[Format] 1BH, 72H, n
[Range of Definition] 00H  n  04H
[Function] 1) The printing color is selected according to the value of n, as follows:
if n=0: black
if n=1: magenta
if n=2: cyan
if n=4: yellow
2) If n has a value other than the above, this command is ignored.
[Initial State] Black selected.
[Related Commands]
[Setting] Commands whose settings are affected by this command.
None
[Setting] Commands that change the effects of this command.
The ESC @ command selects black.
[Operation] Commands whose functionality is affected by this command.
None
[Operation] Commands that change the effects of this command.
None