2011/03/02
Revision: 1 Page: 20
CHAPTER 4: COMMAND SEQUENCE
4.1 Raster Graphics Modes
The following three modes are available for raster graphics commands:
1) Non-compressed mode - the print data is transferred without being compressed.
Effective for printing data with a low compression ratio, such as photographs.
2) Run-length encoded mode - the print data is transmitted after run-length encoding compression.
Effective for printing data such as graphs and figures, in which patterns appear repeatedly.
3) TIFF compressed mode - the print data is transferred after TIFF compression.
Effective for printing data such as graphs and figures, in which patterns appear repeatedly.
To Next Page
Loading...
