Epson WorkForce 633 - Enter Remote Mode (Remote Mode) ESC

2011/03/02
Revision: 1 Page: 62
6.1.1 Enter Remote Mode (Remote Mode) ESC (R 08H 00H 00H "REMOTE1"
ESC "(R" 08H 00H 00H "REMOTE1" Enter Remote Mode
[Format]
ESC (R 08H 00H 00H "REMOTE1"
[Function]
* 1) The current emulation mode is terminated
2) Print data present in the buffer is sent to the printer to be printed
3) The printer enters remote mode.
* Remote mode continues until the “Exit Remote Mode” command is received.
* In the remote mode, XX [nL] [nH] [00H] [m1] ... [mx] type control codes are available.
* This command is only valid in text mode.