Epson WorkForce 633 - Cancel Code; Job Name Information

2011/03/02
Revision: 1 Page: 83
7.9 Cancel code
Structure
Item Byte (Hex) Value (Hex)
Header 1 13h
Parameter counter 1 01
Parameter 1 Cancel request
The parameter <cancel code> is one byte Binary code that indicates the cancel request.
Cancel request Code
No request 01
The status during received cancel command and initialize the printer A1
Request 81
7.10 Job name Information
Structure
Item Byte (Hex) Value (Hex)
Header 1 19
Parameter counter 1 n (Max 37)
Parameter Max 37 Job name information
The parameter <Job name information> is n bytes Binary codes.
It indicates the m1 to m5 parameter and Job name specified by JH command.
If the JH command is not send of printing job, it replies “unknown”.
Item Byte (Hex) Value (Hex)
Header 1 19
Parameter counter 1 0C
Parameter 0C 0000000000 “unknown”