Epson WorkForce 633 - Status Code; Error Code

2011/03/02
Revision: 1 Page: 79
7.1 Status code
Structure
Item Byte (Hex) Value (Hex)
Header 1 01
Parameter counter 1 01
Parameter 1 <Status code>
The parameter <Status code> is one byte Binary code that indicates status code as follows.
Status Status code
In the error state 00
In the busy state 02
In the waiting state 03
In the idle state 04
In the cleaning state 07
In the factory shipment state 08
7.2 Error code
Structure
Item Byte (Hex) Value (Hex)
Header 1 02
Parameter counter 1 01
Parameter 1 <Error code>
The parameter <Error code> is one byte Binary code that indicates error code as follows.
Error Error code
Fatal error 00
Other I/F is selected 01
Paper jam 04
Ink out 05
Paper out 06
Paper size error (Auto duplex paper size error) 0A
Ink overflow error 10
Double Feed 12
Scanner Unit Open Error 37
Stacker Close error (Guide Error) *1 38
BK Slow disable error (Printing disable error) 47
*1 This <error code> is only < PX-203/WorkForce 60/WorkForce T42WD/Epson Stylus Office B42WD/Epson ME
OFFICE 82WD/ME OFFICE 85ND>.