2011/03/02
Revision: 1 Page: 30
5.1.5 Carriage Return CR
CR Ver 1.00
[Name] Carriage Return [Operation]
[Format] 0DH
[Range of Definition] -
[Function] 1) The printing position in the X direction is set to the origin (the left margin) on the X axis of
the position management coordinate system.
[Initial State] -
[Related Commands]
[Setting] Commands whose settings are affected by this command.
None
[Setting] Commands that change the effects of this command.
None
[Operation] Commands whose functionality is affected by this command.
None
[Operation] Commands that change the effects of this command.
None
To Next Page
Loading...
