Epson WorkForce AL-M200DN - Resetting to Factory Defaults

4. Select Power Saving Timer, and then press the button.
5. Select Low Power Timer, Sleep Timer, or Power Off Timer and then press the
button.
6. Low Power Timer/Sleep Timer
Press the
or button to enter the desired value, and then press the button.
You can select from 1 - 45 minutes for Low Power Timer or 6 - 11 minutes for Sleep Timer.
Power Off Timer (for users in Euro, the Middle East, Africa, and Russia only)
Select On for Power Off Timer, press the or button or enter the desired value, and then press
the
button.
You can select from 120-480 minutes for Time to OFF.
Resetting to Factory Defaults
Enabling the Initialize NVM feature and rebooting the printer will reset all the printer settings to their
factory default menu settings.
1. Press the
(Menu) button.
2. Select Admin Menu, and then press the
button.
3. Select Maintenance, and then press the
button.
4. Select Initialize NVM, and then press the
button.
5. Select System Section to initialize the printer settings, and then press the
button.
6. Select Yes, and then press the
button.
The printer restarts automatically with the factory default menu settings.
AL-M200 Series User’s Guide
Using the Operator Panel Menus 173