Epson WorkForce AL-M200DN - Exiting the Power off Mode (for Users in Euro, the Middle East, Africa, and Russia Only)

Note:
❏ In Low Power mode, opening and closing the rear cover will bring the printer back to the
ready-to-print state.
❏ When the printer is in Sleep mode, all buttons on the operator panel except for the
(Energy Saver)
button do not function. To use the buttons on the operator panel, press the
(Energy Saver) button
to exit the power saver mode.
See Also:
“Changing the Power Saver Mode Settings” on page 172
Exiting the Power Off Mode (for users in Euro, the Middle East, Africa, and
Russia only)
Turn on the power switch to exit the Power Off mode.
See Also:
“Changing the Power Saver Mode Settings” on page 172
AL-M200 Series User’s Guide
Basic Operation 20