If this trouble happens, contact our local representative office or authorized dealer.
Mottle
Problem Action
The printed result has mottled
appearance.
Adjust the transfer bias.
1. Launch the Printer Setting Utility, click Adjust BTR on the Printer Maintenance
tab.
2. Adjust the setting for the type of print media being used.
3. Click the Apply New Settings button.
If you use non-recommended print media, use the print media recommended for
the printer.
Note:
If the problem continues even though you have taken suggested actions described above, contact our local
representative office or authorized dealer.
Ghosting
AL-M200 Series User’s Guide
Troubleshooting 195
To Next Page
Loading...
