Problem Action
The printed result has random spots or
is blurred.
Ensure that the toner cartridge is installed correctly.
See Also:
“Installing a Toner Cartridge” on page 210
If you use a non-genuine brand toner cartridge, install a genuine brand toner
cartridge.
Clean up the fusing unit.
1. Load one sheet of paper in the paper tray, and then print a solid image all over
paper.
2. Load the printed sheet with the print surface facing down, and then print a blank
sheet of paper.
Note:
If the problem continues even though you have taken suggested actions described above, contact our local
representative office or authorized dealer.
The Entire Output Is Blank
If this trouble happens, contact our local representative office or authorized dealer.
Streaks Appear on the Output
AL-M200 Series User’s Guide
Troubleshooting 194
To Next Page
Loading...
