EasyManua.ls Logo

Epson WorkForce AL-M200DN - When to Replace the Toner Cartridge; Removing the Toner Cartridge

Epson WorkForce AL-M200DN
232 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
When to Replace the Toner Cartridge
The printer has one toner cartridge: black (K).
When a toner cartridge reaches its usable life-span, the following messages appear on the LCD panel.
Message Remaining Page Yield Printer Status and Action
Toner Low
Replace Soon
*
Approx. 500 pages The toner cartridge has become low. Prepare a new
one.
Replace
Toner Cartridge
The toner cartridge has become empty. Replace the
old toner cartridge with a new one.
*
This warning appears only when a genuine toner cartridge is used (i.e. The Non Genuine Toner mode is disabled).
Important:
When placing a used toner cartridge on the floor or on a table, place a few sheets of paper under the
toner cartridge to catch any toner that may spill.
Do not reuse old toner cartridges that you remove from the printer. Doing so can impair print
quality.
Do not shake or pound used toner cartridges. The remaining toner may spill.
We recommend you use up a toner cartridge within one year after you remove it from the packaging.
Removing the Toner Cartridge
1. Open the front cover.
AL-M200 Series User’s Guide
Maintenance 208

Table of Contents

Other manuals for Epson WorkForce AL-M200DN

Related product manuals