If you see any errors, click Trouble Shooting Guide and follow the instruction.
23. Check if the printer to be installed is listed in the Select Printer screen, and then click Next.
Note:
If the printer to be installed is not listed in the Select Printer screen, try either of the following steps:
❏ Click Refresh to update the information.
❏ Click Add Printer, and then enter the details of the printer manually.
24. Select the required items on the Enter Printer Settings screen, and then click Next.
25. Select the software to be installed, and then click Install.
26. Click Finish to exit this tool.
The wireless configuration is complete.
Using Advanced Setup to Configure Wireless Network Settings
To use the Advanced setup, display the Configure Wireless Settings screen.
The following procedure uses Windows 7 as an example.
AL-M200 Series User’s Guide
Printer Connection and Software Installation 47
To Next Page
Loading...
