Epson WorkForce AL-M200DN - Page 92

The Printer Configurations dialog box appears.
4. Select either of the following according to the type of your printer connection.
For a network printer:
a
Click Add.
The Add New Printer Configuration dialog box appears.
b
Click Connection Wizard.
The Connection Wizard dialog box appears.
c
Select Line Printer Daemon (LPD) Protocol from Access Network Printer or
Printserver Box via.
d
Enter the IP address of the printer in IP Address or Host Name:.
e
Select Epson in Select the printer manufacturer:.
f
Click OK.
The Add New Printer Configuration dialog box appears.
g
Select EPSON AL-M200XX PS3 vX.Y [EPSON AL-M200XX PS3.PPD] from the Assign
Driver list.
Note:
You can specify the printer name in Set Name:.
For a USB printer connected to a computer running the SUSE Linux Enterprise Desktop 11:
a
Click Add.
The Add New Printer Configuration dialog box appears.
The printer name is displayed in the Determine Connection list.
b
Select EPSON AL-M200XX PS3 vX.Y [EPSON AL-M200XX PS3.PPD] from the Assign
Driver list.
AL-M200 Series User’s Guide
Printer Connection and Software Installation 92