❏ When the following window is displayed, select Print in Black.
❏ When the following window is displayed, cancel printing. And then, printing again.
Note:
If you cannot cancel printing from the computer, cancel using the printer's control panel.
Follow the steps below when printing again.
1.
Access the printer driver window.
2.
Clear Borderless on the Main tab.
3.
Select a Paper Type that supports Print in Black.
4.
Select Grayscale.
5.
Set the other items on the Main and More Options tabs as necessary, and then click OK.
6.
Click Print.
Solving Problems
>
It is Time to Replace the Ink Cartridges
>
Continue Printing Temporarily without Replacing In
…
204
To Next Page
Loading...
