Epson WorkForce Pro WF-C4810 Series User Manual

Messages Cause
SMTP server authentication failed.
Change Authentication Method to
SMTP-AUTH.
This message appears when an authentication method mismatch occurs between
a server and a client. The server supports SMTP AUTH.
SMTP server authentication failed.
Change Authentication Method to
POP before SMTP.
This message appears when an authentication method mismatch occurs between
a server and a client. The server does not support SMTP AUTH.
Sender's Email Address is incorrect.
Change to the email address for your
email service.
This message appears when the specied sender’s Email address is wrong.
Cannot access the printer until
processing is complete.
This message appears when the printer is busy.
Setting a Shared Network Folder
Set a shared network folder to save the scanned image.
When saving a le to the folder, the printer logs on as the user of the computer on which the folder was created.
Also, make sure you setup MS Network when creating the shared network folder.
Creating the Shared Folder
Before Creating the Shared Folder
Before creating the shared folder, check the following.
❏
e
printer is connected to the network where it can access the computer where the shared folder will be
created.
❏ A multi-byte character is not included in the name of the computer where the shared folder will be created.
c
Important:
When a multi-byte character is included in the computer name, saving the le to the shared folder may fail.
In that case, change to the computer that does not include the Multi-byte character in the name or change the
computer name.
When changing the computer name, make sure to conrm with the administrator in advance because it may aect
some settings, such as computer management, resource access, etc.
Checking the Network Prole
On the computer where the shared folder will be created, check whether folder sharing is available.
1.
Log in to the computer where the shared folder will be created by the administrator authority user account.
2.
Select Control Panel > Network and Internet > Network and Sharing Center.
Administrator Information > Settings to Use the Printer > Setting a Shared Network Folder
321

Epson WorkForce Pro WF-C4810 Series Specifications

General

Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Automatic Document Feeder	Yes
ADF Capacity	35 sheets
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Print Resolution	4800 x 1200 dpi
Print Speed Black	25 ppm
Print Speed Color	20 ppm
Paper Capacity	250 sheets
Display	2.4" color touchscreen
Mobile Printing	Apple AirPrint
Printer Type	All-in-One
Paper Sizes	Letter, Legal, A4, A5, A6, B5, envelopes
Ink Cartridge Configuration	4 individual ink cartridges
Print Technology	PrecisionCore