1.
Access Web
Cong
and then select the Network Security tab > CA
Certicate
.
2.
Click Delete next to the CA Certicate that you want to delete.
3.
Conrm
that you want to delete the
certicate
in the message displayed.
4.
Click Reboot Network, and then check that the deleted CA Certicate is not listed on the updated screen.
Related Information
& “Application for Conguring Printer Operations (Web Cong)” on page 271
SSL/TLS Communication with the Printer
When the server certicate is set using SSL/TLS (Secure Sockets Layer/Transport Layer Security) communication
to the printer, you can encrypt the communication path between computers. Do this if you want to prevent remote
and unauthorized access.
Conguring Basic SSL/TLS Settings
If the printer supports the HTTPS server feature, you can use an SSL/TLS communication to encrypt
communications. You can congure and manage the printer using Web Cong while ensuring security.
Congure encryption strength and redirect feature.
1.
Access Web
Cong
and select the Network Security tab > SSL/TLS > Basic.
2.
Select a value for each item.
❏ Encryption Strength
Select the level of encryption strength.
❏ Redirect HTTP to HTTPS
Redirect to HTTPS when HTTP is accessed.
3.
Click Next.
A conrmation message is displayed.
4.
Click OK.
e
printer is updated.
Related Information
& “Application for Conguring Printer Operations (Web Cong)” on page 271
Conguring
a Server
Certicate
for the Printer
1.
Access Web Cong and select the Network Security tab > SSL/TLS > Certicate.
Administrator Information
>
Advanced Security Settings
>
SSL/TLS Communication with the Printer
374
To Next Page
Loading...
Need help?
General
