EasyManuals Logo

Epson WorkForce Pro WF-C4810 Series User Manual

Epson WorkForce Pro WF-C4810 Series
383 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #229 background imageLoading...
Page #229 background image
Cannot Solve Problem
If you cannot solve the problem aer trying all of the solutions, contact Epson support.
If you cannot solve printing or copying problems, see the following related information.
Related Information
& “Cannot Solve Printing or Copying Problems” on page 229
Cannot Solve Printing or Copying Problems
Try the following problems in order starting at the top until you solve the problem.
Make sure you match the paper type loaded in the printer and the paper type set on the printer to the paper
type settings in the printer driver.
“Paper Size and Type Settings” on page 28
Use a higher quality setting on the control panel or the printer driver.
Reinstall the ink cartridges already installed in the printer.
Reinstalling the ink cartridges may clear clogging in the print head nozzles and allow the ink to ow smoothly.
However, because the ink is consumed when the ink cartridge is reinstalled, a message asking you to replace the
ink cartridge may be displayed depending on the amount of ink remaining.
“It is Time to Replace the Ink Cartridges” on page 200
Align the print head.
“Aligning the Print Head” on page 132
Run a nozzle check to see if the print head nozzles are clogged.
If there are missing segments in the nozzle check pattern, the nozzles may be clogged. Repeat head cleaning and
the nozzle check alternately 3 times and check if the clogging has cleared.
Note that print head cleaning uses some ink.
“Checking and Cleaning the Print Head” on page 130
Turn o the printer, wait for at least 12 hours, and then check if the clogging has cleared.
If the problem is clogging, leaving the printer for a while without printing may solve the problem.
You can check the following items while the printer is o.
Check that you are using genuine Epson ink cartridges.
Try to use genuine Epson ink cartridges. is product is designed to adjust colors based on the use of genuine
Epson ink cartridges. e use of non-genuine ink cartridges may cause print quality to decline.
“Ink Cartridge Codes” on page 264
Make sure that there are no paper fragments le inside the printer.
When you remove the paper, do not touch the translucent lm with your hand or the paper.
Check the paper.
Check if the paper is curled or loaded with the printable side facing up.
“Paper Handling Precautions” on page 27
“Available Paper and Capacities” on page 259
“Unavailable Paper Types” on page 263
Solving Problems
>
Cannot Solve Problem
>
Cannot Solve Printing or Copying Problems
229

Table of Contents

Other manuals for Epson WorkForce Pro WF-C4810 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson WorkForce Pro WF-C4810 Series and is the answer not in the manual?

Epson WorkForce Pro WF-C4810 Series Specifications

General IconGeneral
ConnectivityUSB, Ethernet, Wi-Fi, Wi-Fi Direct
Automatic Document FeederYes
ADF Capacity35 sheets
Duplex PrintingYes
FunctionsPrint, Copy, Scan, Fax
Print Resolution4800 x 1200 dpi
Print Speed Black25 ppm
Print Speed Color20 ppm
Paper Capacity250 sheets
Display2.4" color touchscreen
Mobile PrintingApple AirPrint
Printer TypeAll-in-One
Paper SizesLetter, Legal, A4, A5, A6, B5, envelopes
Ink Cartridge Configuration4 individual ink cartridges
Print TechnologyPrecisionCore

Related product manuals