Epson WorkForce Pro WF-C4810 Series User Manual

The Position, Size, or Margins of the Copies are Incorrect
e
following causes can be considered.
The paper is loaded incorrectly.
Solutions
Load paper in the correct direction, and slide the edge guide against the edge of the paper.
& “Loading Paper” on page 29
The size of the paper is set incorrectly.
Solutions
Select the appropriate paper size setting.
The originals are not placed correctly.
Solutions
❏ Make sure the original is placed correctly against the alignment marks.
❏ If the edge of the scanned image is missing, move the original slightly away from the edge of the
scanner glass. You cannot scan the area within approximately 1.5 mm (0.06 in.) from the edge of the
scanner glass.
& “Placing Originals” on page 32
There is dust or dirt on the scanner glass.
Solutions
When placing the originals on the scanner glass, remove any dust or dirt that has stuck to the originals,
and clean the scanner glass. If there is dust or stains on the glass, the copy area may extend to include the
dust or stains, resulting in the wrong copying position or small images.
Original Size is wrong in copy setting.
Solutions
Select the appropriate Original Size in the copy setting.
& “Advanced Menu Options for Copying” on page 86
Solving Problems > Printing, Copying, Scanning, and Faxing Quality is Poor > Copy Quality is Poor
221

Epson WorkForce Pro WF-C4810 Series Specifications

General

Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Automatic Document Feeder	Yes
ADF Capacity	35 sheets
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Print Resolution	4800 x 1200 dpi
Print Speed Black	25 ppm
Print Speed Color	20 ppm
Paper Capacity	250 sheets
Display	2.4" color touchscreen
Mobile Printing	Apple AirPrint
Printer Type	All-in-One
Paper Sizes	Letter, Legal, A4, A5, A6, B5, envelopes
Ink Cartridge Configuration	4 individual ink cartridges
Print Technology	PrecisionCore