Epson WorkForce Pro WF-C4810 Series User Manual

Moiré (Cross-Hatch) Patterns Appear in the Copied Image
If the original is a printed document such as a magazine or a catalog, a dotted moiré pattern
appears.
Solutions
Change the reduce and enlarge setting. If a moiré pattern still appears, place the original at a slightly
dierent
angle.
& “Basic Menu Options for Copying” on page 84
An Image of the Reverse Side of the Original Appears in the Copied Image
e following causes can be considered.
When scanning thin originals, images on the back may be scanned at the same time.
Solutions
Place the original on the scanner glass and then place a piece of black paper over it.
& “Placing Originals” on page 32
The copy density setting is too high.
Solutions
Lower the copy density setting.
& “Basic Menu Options for Copying” on page 84
Solving Problems > Printing, Copying, Scanning, and Faxing Quality is Poor > Copy Quality is Poor
223

Epson WorkForce Pro WF-C4810 Series Specifications

General

Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Automatic Document Feeder	Yes
ADF Capacity	35 sheets
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Print Resolution	4800 x 1200 dpi
Print Speed Black	25 ppm
Print Speed Color	20 ppm
Paper Capacity	250 sheets
Display	2.4" color touchscreen
Mobile Printing	Apple AirPrint
Printer Type	All-in-One
Paper Sizes	Letter, Legal, A4, A5, A6, B5, envelopes
Ink Cartridge Configuration	4 individual ink cartridges
Print Technology	PrecisionCore