Epson WorkForce Pro WF-C4810 Series - Page 358

❏ Power O If Disconnected
Select this setting to turn o the printer aer 30 minutes automatically when all ports including the LINE
port are disconnected.
is feature may not be available depending on your region.
Note:
You can also set up from the printer’s control panel.
Settings > General Settings > Basic Settings > Power O Settings >Power O If Disconnected
3.
Click OK.
Setting the Sound
Make the sound settings when operating the control panel, printing, faxing and so on.
Note:
You can also set up from the printer’s control panel.
Settings > General Settings > Basic Settings > Sounds
1.
Access Web Cong and select the Device Management tab > Sound.
2.
Set up the following items as necessary.
❏ Normal Mode
Set the sound when the printer is set to Normal Mode.
❏ Quiet Mode
Set the sound when the printer is set to Quiet Mode.
is is enabled when the one of the following items is enabled.
❏ Printer's control panel:
Settings > General Settings > Printer Settings > Quiet Mode
Settings > General Settings > Fax Settings > Receive Settings > Print Settings > Quiet Mode
❏ Web
Cong
:
Fax tab > Print Settings > Quiet Mode
3.
Click OK.
Synchronizing the Date and Time with Time Server
When synchronizing with the time server (NTP server), you can synchronize the time of the printer and the
computer on the network.
e
time server may be operated within the organization or published on the Internet.
When using the CA certicate or Kerberos authentication, time-related trouble can be prevented by synchronizing
with the time server.
1.
Access Web Cong and select the Device Management tab > Date and Time > Time Server.
2.
Select Use for Use Time Server.
Administrator Information > Settings to Use the Printer > Making Basic Operation Settings for the Printer
358