Epson WorkForce Pro WF-C4810 Series User Manual

5.
Select Print Settings from the pop-up menu.
Note:
If the Print Settings menu is not displayed on macOS Catalina (10.15) or later, macOS High Sierra (10.13), macOS
Sierra (10.12), OS X El Capitan (10.11), OS X Yosemite (10.10), OS X Mavericks (10.9), OS X Mountain Lion (10.8),
the Epson printer driver has not been installed correctly. Enable it from the following menu.
Select System Preferences from the Apple menu > Printers & Scanners (or Print & Scan, Print & Fax), remove the
printer, and then add the printer again. See the following to add a printer.
“Adding the Printer (for Mac OS Only)” on page 139
macOS Mojave (10.14) cannot access Print Settings in applications made by Apple such as TextEdit.
6.
Change the settings as necessary.
See the menu options for the printer driver for details.
7.
Click Print.
Note:
If you want to cancel printing, on your computer click the printer icon in the Dock. Select the job you want to cancel,
and then do one of the following. However, you cannot cancel a print job from the computer once it has been completely
sent to the printer. In this case, cancel the print job by using the printer's control panel.
❏ OS X Mountain Lion (10.8) or later
Click
next to the progress meter.
❏ Mac OS X v10.6.8 to v10.7.x
Click Delete.
Printing > Printing Documents > Printing from a Computer - Mac OS
63

Epson WorkForce Pro WF-C4810 Series Specifications

General

Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Automatic Document Feeder	Yes
ADF Capacity	35 sheets
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Print Resolution	4800 x 1200 dpi
Print Speed Black	25 ppm
Print Speed Color	20 ppm
Paper Capacity	250 sheets
Display	2.4" color touchscreen
Mobile Printing	Apple AirPrint
Printer Type	All-in-One
Paper Sizes	Letter, Legal, A4, A5, A6, B5, envelopes
Ink Cartridge Configuration	4 individual ink cartridges
Print Technology	PrecisionCore