Epson WorkForce Pro WF-M5690DWF

Menu Settings and Explanations
Fax Report Fax Settings List Prints the current fax settings.
Fax Log Prints a transmission report automatically after you send a fax. You can set to
print this report automatically using the following menu.
Setup > System Administration > Fax Settings > Output Settings > Fax
Log Auto Print
Last Transmission Prints a report for the previous fax that was sent or received through polling.
Stored Fax
Documents
Prints a list of fax documents stored in the printer’s memory, such as
unnished
jobs.
Protocol Trace Prints a detailed report for the previous fax that was sent or received.
Related Information
& “Sending Many Pages of a Monochrome Document (Direct Send)” on page 98
& “Sending a Fax Preferentially (Priority Send)” on page 99
&
“Sending Dierent Size Documents Using ADF (Continuous Scan from ADF)” on page 99
&
“Sending Faxes at a Specied Time (Send Fax Later)” on page 97
&
“Receiving Faxes by Polling (Polling Receive)” on page 102
& “Sending Faxes on Demand (Polling Send)” on page 98
& “Storing a Fax Without Specifying a Recipient (Store Fax Data)” on page 97
Memory Device Mode
Note:
Memory device is a generic name for external USB devices such as USB ash drives.
File format
Menu Settings and Explanations
JPEG Select the le format of the le you want to print.
TIFF
PDF
Settings
Note:
Available menus vary depending on the selected le format.
Menu Settings and Explanations
Number of
printouts
Enter the number of printouts.
User's Guide
Printer Basics
26