Copying
1. Load paper in the printer.
2. Place the originals.
3. Enter Copy from the home screen.
4. Enter the number of copies by using the numeric keypad.
5. Press Layout, and then select the appropriate layout.
6. Make other settings as necessary. You can make detailed settings by pressing Settings.
Note:
❏ Press Preset to save your settings as a preset.
❏ Press Preview to preview the copy results. However, you cannot preview when you have placed the originals on the
ADF.
7.
Press the
x
button.
Related Information
& “Loading Paper in the Paper Cassette” on page 41
& “Loading Paper in the Rear Paper Feed” on page 44
& “Placing Originals” on page 47
& “Copy Mode” on page 22
& “Presets Mode” on page 37
User's Guide
Copying
78
To Next Page
Loading...
