❏ Envelope
❏ Pre-punched paper
Note:
You can use pre-punched paper under the following conditions. Automatic 2-sided printing is not available for pre-
punched paper.
❏ Loading capacity: One sheet
❏ Available size: A4, B5, A5, A6, Letter, Legal
❏ Binding holes: Do not load paper with the binding holes at the top or the bottom.
Adjust the print position of your le to avoid printing over the holes.
4.
Slide the edge guides to the edges of the paper.
5. On the control panel, select Setup > Paper Setup > Rear Paper Feed, and then set the size and type of the
paper you loaded in the rear paper feed.
User's Guide
Loading Paper
45
To Next Page