1. Open the document cover.
2. Remove any dust or stains on the scanner glass.
3. Place the original face-down and slide it to the corner mark.
Note:
❏ A range of 1.5 mm from the edges of the scanner glass is not scanned.
❏ When originals are placed in the ADF and on the scanner glass, priority is given to the originals in the ADF.
4. Close the cover gently.
Note:
Remove the originals aer scanning or copying. If you leave the originals on the scanner glass for a long time, they may
stick to the surface of the glass.
User's Guide
Placing Originals
50
To Next Page
Loading...
