Setting Options Description
Auto Rotation On Select On to rotate the scanned documents 90
degrees when an A4 or Letter size document has
Off
been loaded long edge first into the ADF. The
document is sent at A4 or Letter size. If this option is
disabled, the document is sent at A3 size. If the
recipient's fax machine does not support A3 size, the
document is automatically reduced in size. This
setting is not applied to color faxes and monochrome
faxes sent using the Direct Send function.
Parent topic: Setting Up Fax Features Using the Product Control Panel
Receive Settings - Fax
Set the receive options you want to use for incoming faxes.
Setting Options Description
Receive Mode Manual Lets you confirm whether an incoming fax should be
printed; a telephone must be connected to the
product.
Auto Automatically receives and prints faxes.
Distinctive Ring All If you are using a Distinctive Ring Service on your
phone line, your telephone company can assign two
Single
or more phone numbers to the same line and assign
Double different ring patterns to each. If you use this service,
select the number of rings for your fax number so your
Triple
product can receive faxes on the correct number of
Double&Triple rings. All works for phone lines that do not use this
service.
Rings to Answer 1 to 9 Sets the number of rings before your product receives
a fax. If Receive Mode is set to Auto and an
answering machine is connected to the product, make
sure this setting is set higher than the number of rings
your answering machine is set to for answering a call.
174
To Next Page
Loading...
Need help?
General
Weight and Dimensions
