Epson WorkForce WF-7830 Series - Page 360

Related Information
& “Obtaining a CA-signed Certicate” on page 358
Importing a CA-signed
Certicate
c
Important:
❏ Make sure that the printer’s date and time is set correctly.
❏ If you obtain a
certicate
using a CSR created from Web
Cong
, you can import a
certicate
one time.
1.
Access Web Cong and then select the Network Security tab > SSL/TLS > Certicate.
2.
Click Import
A
certicate
importing page is opened.
3.
Enter a value for each item.
Depending on where you create a CSR and the le format of the certicate, required settings may vary. Enter
values to required items according to the following.
❏ A
certicate
of the PEM/DER format obtained from Web
Cong
❏ Private Key: Do not congure because the printer contains a private key.
❏ Password: Do not congure.
❏ CA Certicate 1/CA Certicate 2: Optional
❏ A certicate of the PEM/DER format obtained from a computer
❏ Private Key: You need to set.
❏ Password: Do not congure.
❏ CA Certicate 1/CA Certicate 2: Optional
❏ A certicate of the PKCS#12 format obtained from a computer
❏ Private Key: Do not congure.
❏ Password: Optional
❏ CA Certicate 1/CA Certicate 2: Do not congure.
4.
Click OK.
A completion message is displayed.
Note:
Click
Conrm
to verify the
certicate
information.
Related Information
& “Application for
Conguring
Printer Operations (Web
Cong
)” on page 266
Administrator Information > Advanced Security Settings > Using a Digital Certicate
360