EG_GenPro25e_1055_UG_002_UK
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCOGENER reserves the right to make any modification.
Dct_427_02
Warning
The GenPro 25e is dedicated to 'Machine To Machine' (M2M) applications only.
ERCOGENER recommends the use of SIM card subscriptions of the 'Machine To Machine'
(M2M) type.
Video, VoIP (Voice over IP) transfer requires the payment of additional royalties.
ERCOGENER to read carefully all documents linked to the GenPro 25e (User Guide, Application
Notes, Command List) that can be download on our website www.ercogener.com..
ERCOGENER cannot be held responsible for:
- Problems due to an inappropriate use of the GenPro 25e.
- Problems due to a wrong configuration
- Problems due to the wrong use of an embedded software application developed or supplied by a
third party.
- Dysfunctions due to the absence or a bad coverage or termination of the GSM, GPRS networks.
- Dysfunctions if the product is used for the watching of physical persons where human life is
engaged.
ERCOGENER reserves the right to modify the functions of its products "GenPro 25e" and "EasePro"
without previous notice.
- In order to avoid any risk of electrocution, do not open the casing.
- For any functioning, the casing must be closed.
- No internal part can be repaired by the user. The GenPro 25e must be returned to the factory for any repair
the RMA request (Return Material Authorization).
- The GenPro 25e must be placed in a normally ventilated area, out of sources of heat.
- In order to guarantee the electromagnetic compatibility, the length of the serial cable, the power cable and
the inputs/outputs cable must not exceed 3 meters.
- The GenPro 25e must not be connected directly to the mains supply (230 V
AC
); a voltage adapter must be
used.
This marking on the product, accessories, packaging or literature indicates that the product
and its electronic accessories (e.g. cable etc.) should not be disposed of with other household
waste.
To Next Page
Loading...
