ESAB Aristo U6 - Recalling Welding Data; Deleting Welding Data

8 MEMORY MANAGMENT
0459 287 601
- 27 -
© ESAB AB 2020
- - MEMORY MENU - -
CURRENT SETTINGS
MIG / MAG
Fe ER70S
0,0 VOLT


0,8 MM
5,0 M/MIN
NEXT
Press NEXT to access the MEMORY MENU.
Choose which memory position you want to recall, e.g. position 2. Press NEXT until you
come to position 2.
Press RECALL to recall memory position 2. The following question appears:
2 
OVERWRITE CURRENT
WELD DATA?
YES NO
Press YES to delete welding data from the memory position, press NO to exit.
This icon in the MAIN MENU shows which memory position that is recalled.
4 - STROK GRAT FILL HOT START NEXT
8.3 Delete welding data
Press to access the SELECT MENU and then on MEMORY MENU to access
the relevant settings.
- - MEMORY MENU - -
CURRENT SETTINGS
MIG / MAG
Fe ER70S
0,0 VOLT


0,8 MM
5,0 M/MIN
NEXT
Press NEXT to access the MEMORY MENU.