ESAB EMP235ic - Equipment Package Contents

2 INTRODUCTION
0463 479 001
- 12 -
© ESAB AB 2017
Exclusive to ESAB, sMIG provides users with excellent short circuit transfer arc
characteristics.
The EM and EMP family connects to 120V–230V,1~50/60Hz input power supplies,
supplied by mains or generator power. Incorporating a PFC (Power Factor Correction) circuit
significantly increases power efficiency.
Key features:
• Excellent MIG characteristics (EM)
• Excellent multi-process, MIG/Stick and Lift/TIG (EMP) welding capabilities
• Automatic recognition of input power with PFC (120V–230V)
• Large 4.3in. (11cm) high resolution customizable user interface (EMP)
• Rugged case design and internal hardware
• Portable
• High grade cast aluminum wire drive system provides excellent control of drive roll
geometry ensuring smooth, precise wire feeding
• Professional high grade accessories
2.1 Equipment
Package consists of the following:
EMP series
• ESAB EMP235ic power source
• Tweco® Spray Master 250A MIG gun with 15ft (5m) cable, 0.030in., 0.035in.,
0.045in. (0.8mm, 0.9mm, 1.2mm) contact tips and Allen key
• ESAB stick electrode holder, 12ft (4m), 200A
• Ground clamp, 10ft (3m), 250A
• Input cable 10ft (3m) with 230V plug (part of power source)
• Power adapter cable (230V to 120V, 15A)
• Victor® Flow Meter with 10ft (3m) gas hose
• ESAB OK AristoRod™ premium solid wire 0.035in. (0.9mm) 11# spool
• ESAB Atom Arc Acclaim 1/8in. premium stick electrodes 1# sample pack
• Drive roll, 0.023in. /0.030in. / 0.035in. / 0.045in. (0.6 mm / 0.8mm / 0.9mm /
1.2mm)
• Guide tubes 0.023in. – 0.045 in. (0.6mm – 1.2mm)
• Thickness gauge tool
• USB stick including manuals
• Safety manual
• Quick start guide